- L
- J
- K

Research Hardware Funding
0% complete
$2,933 raised of $5.5K
49 donations
I need your help to expedite the development of a powerful brain-computer interface. With your help I can buy off-the-shelf hardware and focus strictly on the software (my real expertise) saving valuable time. I promise to never take any of this seed money for my food, shelter or entertainment.
Here is my story:
Some of my first memories are sitting on my father's knee as he tried to teach me Linux. I especially remember staring in amazement as he built all different kinds of servers and computers. The sounds of multiple computers resonating together is still one of my favorite sounds.
I started to take computer programming seriously when I left for an all boys boarding school at the age of 13 in upstate New York, Trinity-Pawling. One day I decided to take the AP Computer Science course, unfortunately I had no programming experience and the course was only months away from starting. So I worked out an agreement with the computer science teacher, Mr. Metcalf, to sit in his office everyday and write practice programs, and when I got stuck I could ask him for help. For months I sat in his office plugging away on the keys quickly moving through all the online problems he could throw my way.
I entered the engineering school at Clemson in the fall of 2010. The school makes freshmen engineers go to at least two different engineering tours to help us pick a major. I vividly remember the Computer Engineering tour, I remember the face of the TA who showed us around, I remember the demos they showed us, and above all I remember calling my mother right after and telling her that "I must at least try to pursue Computer Engineering, there is a high chance I will fail, but I fear not trying more.” I did not know if I could do it for I had just gotten a 2.41 GPA my first semester. On top of that Computer Engineering was and still is one of the hardest majors offered at Clemson. I worked hard that semester and pulled off a perfect 4.0 GPA to give myself the confidence needed that I could do it.
Class sizes continually shrank and shrank as my peers fell behind or switched majors. Before I knew it I found myself programming in 3-4 languages at a time and pulling all nighters finishing large scale projects on time. At the same time I helped build a newer fraternity from the ground up; I thought it was more fun to incubate and hatch a golden egg then to walk into an established organization. I took roles as Treasurer, Vice President, and had to even step in as Interim President for a period. Lessons learned fast and problems solved even faster, we built our fraternity up and up.
All of the sudden I found myself being recruited to work for Boeing in a three-year rotational program to start on June 27th, 2014 right after graduation. I started Push The World LLC on June 2nd, 2014 only 25 days before starting at Boeing. A wise man once told me that a rising tide raises all boats. So to that end I started teaching myself how to write iPhone apps, which required learning a new programming languages and paradigms. Thankfully I met the Guru at my local gym. He too wrote apps and was more than happy to help me over the big hurdles. For about 10 months I woke up everyday at 3am, squeezed in 4-5 hours of programming, raced to work at Boeing as a Robotics Engineer, and then only to come home to meetings or more programming. Weekends were the best, I could fit in almost 20-24 hour of programming. All of the suddent I found myself working 55-59 hours at Push The World and only 40 hours at Boeing each week. As I always say, the inevitable is bound to happen, I decided to leave Boeing exactly one year after I started.
One month after leaving Boeing I had my biggest win yet, I successfully launched a non-profit, called Push The Code. Our mission is to provide students with an environment for them to learn how to program in their own unique learning style. If they get stumped along the way or need guidance, we have a team of local computer professionals ready to help them. Push The Code is still under development but is already having a positive impact in the Charleston educational system. This program really taught me one of my favorite life lessons: I can do anything I put my mind too, even if I have no idea where to start and don't know if it is even possible. Further, I learned that I could channel that feeling of doubt and fear of failure into a mechanism to push my self harder than ever.
Why the gofundme?
My current full time project is to create a brain-computer interface that allows humans to naturlly interface with a computer in their most intimate way, through silent communication. How do you make the impossible possible? You start by casting a wide net and quickly pulling the string to see what you caught. I am reading every piece of literature and academic article I can get my hands on. I watch every video I can find and talk with every PhD I can. Exhaust every opportunity available till I achieve my vision of creating a device that interfaces with the brain. The last thing I want to do is take money from an Investor for I am not sure the path or timeline of this endeavor and I do not want their influence to direct the outcome. No doubt, this is a passion project.
Please know now there is no guarantee of success, but there is a guarantee that I will never quit. Even if you can’t help me with programming, you can still help! I need the proper equipment to make this dream a reality. I am confident that my skills and expertise should go into the development of the software versus the development of the hardware. There is already a steady supply of hardware on the market, however it is costly.
What are the costs?
Currently I am in talks with several major EEG companies and the best option so far seems to be Cognionics Quick-20-Dry Headset. The headset provides easy expansion from 2-Channels all the way up to 20-Channels, with cost ranging from $2,800 to $16,000 respectively. I plan to acquire 8-Channels costing just under $5,500. Their system quickly incorporates into the prototyping platform I use called BCILAB. Further their product accounts for and removes artifacts caused by walking, eye blinks and muscle movements near the head such as neck and jaw. Most importantly thought, the system uses dry electrodes which allow for users to quickly setup and remove the headset; unlike traditional wet systems which require a gel for conduction.
http://www.cognionics.com/index.php/products/hd-eeg-systems/quick-20-dry-headset
Here is my story:
Some of my first memories are sitting on my father's knee as he tried to teach me Linux. I especially remember staring in amazement as he built all different kinds of servers and computers. The sounds of multiple computers resonating together is still one of my favorite sounds.
I started to take computer programming seriously when I left for an all boys boarding school at the age of 13 in upstate New York, Trinity-Pawling. One day I decided to take the AP Computer Science course, unfortunately I had no programming experience and the course was only months away from starting. So I worked out an agreement with the computer science teacher, Mr. Metcalf, to sit in his office everyday and write practice programs, and when I got stuck I could ask him for help. For months I sat in his office plugging away on the keys quickly moving through all the online problems he could throw my way.
I entered the engineering school at Clemson in the fall of 2010. The school makes freshmen engineers go to at least two different engineering tours to help us pick a major. I vividly remember the Computer Engineering tour, I remember the face of the TA who showed us around, I remember the demos they showed us, and above all I remember calling my mother right after and telling her that "I must at least try to pursue Computer Engineering, there is a high chance I will fail, but I fear not trying more.” I did not know if I could do it for I had just gotten a 2.41 GPA my first semester. On top of that Computer Engineering was and still is one of the hardest majors offered at Clemson. I worked hard that semester and pulled off a perfect 4.0 GPA to give myself the confidence needed that I could do it.
Class sizes continually shrank and shrank as my peers fell behind or switched majors. Before I knew it I found myself programming in 3-4 languages at a time and pulling all nighters finishing large scale projects on time. At the same time I helped build a newer fraternity from the ground up; I thought it was more fun to incubate and hatch a golden egg then to walk into an established organization. I took roles as Treasurer, Vice President, and had to even step in as Interim President for a period. Lessons learned fast and problems solved even faster, we built our fraternity up and up.
All of the sudden I found myself being recruited to work for Boeing in a three-year rotational program to start on June 27th, 2014 right after graduation. I started Push The World LLC on June 2nd, 2014 only 25 days before starting at Boeing. A wise man once told me that a rising tide raises all boats. So to that end I started teaching myself how to write iPhone apps, which required learning a new programming languages and paradigms. Thankfully I met the Guru at my local gym. He too wrote apps and was more than happy to help me over the big hurdles. For about 10 months I woke up everyday at 3am, squeezed in 4-5 hours of programming, raced to work at Boeing as a Robotics Engineer, and then only to come home to meetings or more programming. Weekends were the best, I could fit in almost 20-24 hour of programming. All of the suddent I found myself working 55-59 hours at Push The World and only 40 hours at Boeing each week. As I always say, the inevitable is bound to happen, I decided to leave Boeing exactly one year after I started.
One month after leaving Boeing I had my biggest win yet, I successfully launched a non-profit, called Push The Code. Our mission is to provide students with an environment for them to learn how to program in their own unique learning style. If they get stumped along the way or need guidance, we have a team of local computer professionals ready to help them. Push The Code is still under development but is already having a positive impact in the Charleston educational system. This program really taught me one of my favorite life lessons: I can do anything I put my mind too, even if I have no idea where to start and don't know if it is even possible. Further, I learned that I could channel that feeling of doubt and fear of failure into a mechanism to push my self harder than ever.
Why the gofundme?
My current full time project is to create a brain-computer interface that allows humans to naturlly interface with a computer in their most intimate way, through silent communication. How do you make the impossible possible? You start by casting a wide net and quickly pulling the string to see what you caught. I am reading every piece of literature and academic article I can get my hands on. I watch every video I can find and talk with every PhD I can. Exhaust every opportunity available till I achieve my vision of creating a device that interfaces with the brain. The last thing I want to do is take money from an Investor for I am not sure the path or timeline of this endeavor and I do not want their influence to direct the outcome. No doubt, this is a passion project.
Please know now there is no guarantee of success, but there is a guarantee that I will never quit. Even if you can’t help me with programming, you can still help! I need the proper equipment to make this dream a reality. I am confident that my skills and expertise should go into the development of the software versus the development of the hardware. There is already a steady supply of hardware on the market, however it is costly.
What are the costs?
Currently I am in talks with several major EEG companies and the best option so far seems to be Cognionics Quick-20-Dry Headset. The headset provides easy expansion from 2-Channels all the way up to 20-Channels, with cost ranging from $2,800 to $16,000 respectively. I plan to acquire 8-Channels costing just under $5,500. Their system quickly incorporates into the prototyping platform I use called BCILAB. Further their product accounts for and removes artifacts caused by walking, eye blinks and muscle movements near the head such as neck and jaw. Most importantly thought, the system uses dry electrodes which allow for users to quickly setup and remove the headset; unlike traditional wet systems which require a gel for conduction.
http://www.cognionics.com/index.php/products/hd-eeg-systems/quick-20-dry-headset
