URGENT

today 10/02/26 I was heading home with my partner when I suddenly spotted an elderly lady who had fallen over with her walker.. there were several cars in front and numerous pedestrians. only one little lady stopped and had gone to get help.. I had to get behind and take all her weight and lift her straight legged to a standing position brace her with one leg and arrange the mobility aid behind for her to fall back into...

Hello everyone , I have an invention that will lift the lifestyles of us all at some point . Securing a longer lasting self reliant lifestyle upon the users.

My name is Bradley Spence.

A few mths ago I received a call from my mother who tripped over the garden edging timber and had a significant impact onto her loose gravel driveway. As mother is very self-reliant the call came a good forty minutes after because no_one bothered to stop and help. Even though in open view of the public, so my mother had to drag herself backwards to the car and proceed to beep her car horn until her good neighbour came to her aid.. and then mum ended up with as much bruising from manually being lifted as sustained in the fall.

So, i began inventing the ezy-up. So far

The ezy-up is a mobility aid with a lifting seat. so that in case of a fall the ezy-up can be lowered to ground level so people may back into it and the ezy-up will lift said person back to a seated position in its own space.

self-leveling for uneven ground and adjustable for stairs

This device will help handicap / disabled get down to or up from the ground in any environment and for any purpose such as to play with infants, or general tasks ezy.

not to mention its applications for pets to get up and down off furniture or in and out of cars, such as to go to vet / park, ect.

but most of all its to ensure a more secure and self-reliant lifestyle.

so far I have a provisional patent and looking for assistance to get further through the process.

contact me for any further information please..

Bradley Spence.

Investor Pitch Deck — Portable Mobility Aid

1. Title Slide

Portable Mobility Aid: Empowering Floor‑to‑Stand Independence

Restoring mobility, dignity, and safety for millions

2. The Problem

• 1 in 3 adults over 65 experience a fall each year

• Many cannot rise from the floor without assistance

• Current mobility aids (walkers, rollators, chairs):

o Don’t reach floor level

o Are bulky, non‑portable, or require a caregiver

• Consequences:

o Loss of independence

o Increased injury risk

o Higher healthcare and aged‑care costs

3. The Opportunity

• Revolutionizing Global mobility aid market: >$10B

• Aging population: 1.5B people over 65 by 2050

• Growing demand for independent living solutions

• Healthcare systems seeking cost‑reducing assistive technologies

4. Our Solution

A lightweight, portable mobility aid that enables users to safely transition from floor → seated → standing without assistance.

Key innovations:

• Adjustable platform

• Extendable/retractable legs (manual or powered)

• Safe, stable lift mechanism

• Optional handles, seat frame, and remote control

5. Product Features

• Telescopic legs with pneumatic or mechanical actuation

• Battery‑powered pump with safety valve

• Non‑slip feet or castor wheels

• Weight‑sensing and level‑sensing systems

• Independent leg control for uneven surfaces or stairs

• Compact, home‑friendly design

6. Why Now

• Rapid growth in home‑based care

• Increased focus on fall prevention

• Rising caregiver shortages

• Strong consumer preference for independence‑preserving devices

7. Competitive Landscape

Solution Portable Floor‑Level Assist Independent Use Cost

Walkers/Rollators ✔️ ❌ ✔️ Low

Hoists/Lifts ❌ ✔️ ❌ High

Recliner Chairs ❌ ❌ ✔️ High

Our Device ✔️ ✔️ ✔️ Medium

Your device sits in a unique, underserved category.

8. Business Model

Revenue streams:

• Direct‑to‑consumer sales

• Partnerships with aged‑care providers

• Hospital/rehab procurement

• Subscription maintenance for powered units

• Licensing to mobility‑aid manufacturers

9. Go‑To‑Market Strategy

• Launch through online D2C channels

• Partner with physiotherapists and occupational therapists

• Demonstration programs in aged‑care facilities

• Insurance and NDIS reimbursement pathways

• Distributor partnerships for global expansion

10. Traction & Roadmap

Current:

• Patent‑pending design

• Prototype development underway

• Early interest from aged‑care partners

Next 18 Months:

• Certification & safety testing

• Pilot deployments

• Manufacturing scale‑up

• Commercial launch

11. Financial Projections (High‑Level)

• Year 1: Prototype + pilot revenue

• Year 2: National rollout

• Year 3: International expansion

• Gross margins: 45–60% (hardware + service mix)

12. Investment Ask

Seeking $2 million to fund:

• Engineering & prototyping

• Regulatory approvals

• Manufacturing setup

• Marketing & distribution

• Team expansion

13. Vision

A world where no one is left on the floor —

where independence, dignity, and mobility are accessible to all.

Project Plan & Milestones

Stage 1 — Prototype Refinement (0–10 months)

• Engineering optimisation

• Safety and stability testing

• User‑experience trials with physiotherapists and aged‑care partners

Stage 2 — Certification & Compliance (10–19 months)

• Medical device safety assessment

• Australian regulatory pathway preparation

• Documentation for TGA classification (if applicable)

Stage 3 — Pilot Manufacturing (19–24 months)

• Engage SA‑based manufacturing partners

• Produce pilot units for testing

• Conduct trials in aged‑care and rehabilitation settings

Stage 4 — Commercial Launch (24–36 months)

• Market entry strategy

• Distribution partnerships

• National and international scaling

6. Budget & Funding Request

Budget Category Description Estimated Cost (AUD)

Engineering & Prototype Development Design, materials, and iterative prototyping $2,000,000

Safety Testing & Certification Compliance testing, safety validation, and documentation $1,500,000

Manufacturing Tooling & Pilot Production Setup of manufacturing processes and pilot batch production $3,000,000

Market Validation & User Trials Clinical trials, user feedback, and market research $1,500,000

IP Protection & Regulatory Documentation Patent filing, legal fees, and regulatory submissions $1,000,000

Marketing & Distribution Marketing campaigns, sales channels, and distribution logistics $1,500,000

Contingency & Miscellaneous Unforeseen expenses and additional resources $1,000,000

Total Project Cost: $11,000,000

Funding Requested: $2,000,000 to start + regular funding reviews to progress each stage of project plan.

Co-investment: $1,400.00

scan to donate $10,000.00

scan to donate $1,000.or $500 or $100