
I'm a Medically Retired Disabled Veteran building a 50 to 80
Be the first to donate
Inspire others and help Loran G build momentum.
1st donor
Help a Medically Retired Disabled Veteran Fund a 50-to-80 Year Subterranean Passive Geothermal Earth Tube Climate System!
Hello friends, family, neighbors, and supporters,
My name is Loran, and I am a Medically Retired Disabled Veteran on a mission to transform my single-story, two-bedroom home in Arkansas into a permanent, highly durable model for ultra-low-energy climate engineering and home self-sufficiency.
As a veteran, I know the value of deep preparation, tactical planning, and building infrastructure to strict structural standards. This crowdfunding initiative is designed to raise the material budget for an innovative, sustainable project: a permanent Subterranean Passive Geothermal Earth Tube Climate System. This system will rely entirely on the passive thermal energy of the earth to pre-condition the fresh air entering my home.
The Reality: The Fast DIY Approach vs. Our Proper Process
Most earth tube installations fail because builders take a fast DIY shortcut: burying two pipes side-by-side in a single, narrow trench. While this method is faster and cheaper upfront, it fundamentally breaks the laws of thermodynamics. When you place two pipes right next to each other, they are forced to compete for the exact same localized pocket of earth. The narrow column of dirt between them quickly becomes saturated with heat, causing the ground temperature to spike and rendering the system completely useless within hours. Furthermore, fast DIY builds often use thin, corrugated pipe or unbraced fittings that buckle under earth pressure, leading to water pooling, subsoil mold, or catastrophic pipe failure within just a few years.
Our system entirely rejects those quick fixes. We are executing a maximum-efficiency civil design by digging two completely separate parallel trenches using a 15-to-16 inch bucket, leaving a 3-foot-6-inch to 3-foot-8-inch barrier wall of native, undisturbed earth left intact between them. By pinning our twin 160-foot runs of seamless smooth-wall HDPE pipe tightly against the absolute outside walls of these trenches, we achieve a massive 5.0 to 5.33 feet of total pipe-to-pipe isolation.
This precision geometry ensures that neither line will ever experience thermal bleed from the other. The unheated, infinite heat sink of the deep subsoil will pull heat out of the air streams with maximum efficiency, preventing thermal soil saturation and delivering an incredibly stable, crisp 60°F climate drop to the home closet mechanical station.
Our total target funding for this complete engineering build is exactly $7,000. Every single dollar of your generosity will go directly toward purchasing raw, permanent building hardware and heavy-duty mechanical ventilation equipment:
How the Earth Tube Climate System Works Standard air-source heat pumps consume massive amounts of grid electricity and cycle constantly during extreme weather, leading to heavy mechanical wear and tear. This system bypasses extreme grid reliance by using the earth itself as a massive, passive "pre-cooler" and "pre-heater".
Six feet below the surface, the ground temperature stays locked into a stable, cool 58°F year-round. High-efficiency, low-wattage smart inline closet fans will draw raw outside air through these loops. In the summer, hot humid air will completely shed its heat to the cool earth, delivering crisp air directly past indoor ceiling fans. In the winter, freezing air is pre-heated to nearly 50°F before it ever reaches the primary heat pump. This drastically lowers monthly energy bills, eliminates high-stress heating and cooling cycles, and extends the operational life of the primary heating and cooling equipment.
Itemized Allocation of the $7,000 Budget Every donation directly funds high-quality, commercial-grade components engineered to industrial civil standards to guarantee an operational lifespan of 50 to 80 years:
Subterranean Pipelines: 320 total linear feet of 6-inch seamless, solid-wall HDPE utility pipe coils (to eliminate underground joints and guarantee zero risk of radon gas or groundwater leaks).
Deep-End Subsoil Drainage: High-density polypropylene structural foam valve vaults and specialized waterless HepvO check valves to manage condensation drip-off cleanly inside an uncrushable underground protective capsule.
Civil Engineering Aggregates: Bulk aggregate filter beds (coarse masonry sand and washed pea stone gravel) paired with civil-grade non-woven geotextile drainage fabric to permanently prevent clay silt intrusion.
Yard Intake Structure: Two perfectly straight vertical white Schedule 40 PVC stalks anchored to deep-set treated 4x4 posts, fully shielded from solar baking and UV rot inside an aluminum or stainless steel louvered penthouse kiosk.
Indoor Mechanical Closet Station: Two smart-controlled 6-inch EC inline high-static duct fans, airtight filter housings equipped with high-efficiency MERV-13 filters to trap airborne dust and pollen, and spring-loaded butterfly backdraft dampers to stop attic draft migration.
Attic Distribution Network: Premium R-19/R-30 thick fiberglass insulation sleeves with airtight foil vapor barriers to encapsulate the pipeline distribution branches across the open attic trusses, preventing thermal loss and condensation.
Machinery & Fuel Logistics: Covers the fuel and fluid logistics required to operate my tractor and backhoe over a multi-day excavation window to safely clear lines and dig the deep trenches, along with freight delivery line fees to truck these massive materials directly to my land.
Follow the Mission: Real-Time Build Documentation
This project is an open-source educational mission. I am handling the heavy trench digging and backhoe work myself. To ensure absolute transparency and to share every step of the engineering process with the community, I am documenting the entire build online.
You can follow, watch, and interact with the construction loops live across my channels:
Twitch (elggy_): Join me for live, unedited broadcasts right from the field as I operate the backhoe, assemble the HDPE lines, and execute the deep-end drainage vault.
YouTube (ELGGY72) & Rumble: Watch itemized build breakdowns, step-by-step technical guides, tool reviews, and permanent video archives of our progress from raw trenches to a functioning climate loop.
Discord: Step into our community server for behind-the-scenes blueprints, direct parts lists, photo logs, and real-time text chat updates where you can ask questions about the infrastructure.
Addressing the Skepticism: Open House & Real-World Experience I know there is a lot of skepticism surrounding earth tube systems—both globally and right here in my local community. Many people doubt that burying plastic lines can truly cool a house during a blistering southern summer or heat it during a freezing winter without skyrocketing utility bills.
I welcome that skepticism, and I am opening up this system for the community to experience firsthand.
A lot of folks right here locally want to see the system finished and actually experience how it feels. I am fully committing to making that happen. Once the installation is complete, I will be hosting local open-house days so neighbors, builders, and skeptics can step inside, feel the air coming directly out of the earth loop, and verify the performance themselves.
Your generosity will directly purchase raw, permanent materials, helping a disabled veteran bring this self-sufficient green infrastructure design to life and provide an educational showcase for our local community.
Thank you so much for your donations, your support, and for sharing this journey with me!





