3D Printing masks, valves, supplies for Indonesia

BaliMakers now turned their printers fully into the war against COVID-19.

Located in our beautiful Bali, we are supplying Bali and Indonesia with the most important items the hospitals are requesting.

We need your help to continue this mission. We would love to have Indonesia reopened and Bali shining again.


- 3D Printd Parts -

Venturi Valves

Needed to deliver a controlled amount of Oxygen to patients.



Full face masks

Economic solution for first line nurses to avoid eye particles and air contact with patients.




Air splitters

Extremely important item, can supply air to more than 1 patient at the same time, using only 1 breathing machine. Machines are now scarce.



We have a limited capacity to manufacture these items, so we have contacted our customers, partners and every maker in order to produce these collectively, more than 350 machines are now 3D printing through our team. 


What we need to continue manufacturing and growing?


- A venturi valve takes approximately 3.5% of a filament roll (consumables for 3D printers), with a standard weight of 2.2lbs or 1kg, and approximately $20/roll worldwide. 

Takes approximately 2hs printing per venturi valve

For every $20 donated, we can make 28 venturi valves for patients.




- A face mask takes 1.5% of a filament roll and requires a transparent sheet (can be PVC, poly-carbonate, acetate, etc.)

Takes approximately 1hs printing per mask

For every $20 donated, we can print 66 face masks for nurses and doctors.

On top we add an elastic band and a PVC/poly-carbonate transparent and cleanable layer. That adds about 60 cents per unit.

1 full mask will end up costing us a bit less than $1. 


- An air splitter takes 4.5% of a filament roll.

Takes approximately 2,5hs printing per air splitter

For every $20 donated, we can make 22 air splitters for patients.

----------------------------------------------------------------------------------------


100% of the funds will go to filament for 3D printing, no profit, no extra materials, not even salaries. We will be needing some of the funds for shipping inside Indonesia, but does not add a considerable cost fortunately.




IF YOUR CARD GETS REJECTED BY GOFUNDME, CAN USE PAYPAL DIRECTLY OR CREDIT CARD TOO:                                                            https://www.paypal.com/pools/c/8o9O1nHkuv 





- Follow us @balimakers we will be posting all updates -

 

*If you have a 3D printer and do not know how to contribute, please get in touch directly @Balimakers 


**If you are a filament manufacturer (PLA or ABS, 1.75mm) and can contribute to our cause, please contact us directly @Balimakers

All help highly appreciated, together we can beat this virus